Bending and dynamic characteristics of SS316L–IN625 functionally graded structures fabricated by laser-directed energy deposition [DOI]

Jaehyeong Lim, Mohammad Amir, Ahmed Raza, Sang-Woo Kim*, Advanced Composite Materials, Online published, 2026.

Buckling behavior of a propellant tank dome assembly for a small launch vehicle considering geometric imperfections and manufacturing defects  [DOI]

Yeji Kim, Gyeong-Han Lee, Sook Lee, Sang-Woo Kim*, Soo-Yong Lee, Aerospace Science and Technology, Accepted, 2026.

High-fidelity static response of porous functionally graded stiffened panels with cutouts for aerospace structures [DOI]

Jaehyeong Lim, Ahmed Raza, Sang-Woo Kim*, International Journal of Aeronautical and Space Sciences, Vol.27, pp.3136-3156, 2026. 

Effect of liquid electrolyte–epoxy ratio on electrochemical and mechanical performance of biphasic structural battery electrolytes  [DOI]

Young-Cheol Kim, Seong-Hoon Kim, Sang-Woo Kim*, Journal of Materials Chemistry A, Vol.14, No.46, pp.31662-31672, 2026.

Prediction of effective material properties of 2D plain-woven CFRP composite using a CNN-DNN hybrid surrogate model based on cross-sectional image  [DOI]

Dong-Hyeop Kim, Yuseon Lee, Sang-Woo Kim*, Composite Structures, Vol.391, 120542, 2026.

Dynamic responses of porous functionally graded plates containing cracks resting on elastic foundations via XFEM [DOI]

Ahmed Raza, Mohammad Amir, Sang-Woo Kim*, Steel and Composite Structures, Vol.60, No.4, pp.xx-xx, 2026.

Coupled effects of skew geometry and cracking on the free vibration of functionally graded plates using XFEM–HSDT approach [DOI]

Ahmed Raza, Mohammad Amir, Sang-Woo Kim*, Materials Today Communications, Vol.51, 114913, 2026. 

Prediction of process-induced deformation in CFRP multispar flaps using sequentially coupled thermomechanical analysis considering fabric patterns and stacking sequences [DOI]

Dong-Hyeop Kim, Sang-Woo Kim*, Tae Su Kim, Advanced Composites and Hybrid Materials, Vol.9, No.169, 2026. 

Analysis of cracked skew sandwich plates with functionally graded porous cores under free vibration [DOI]

Mohammad Amir, Ahmed Raza, Sang-Woo Kim*, Journal of Sandwich Structures and Materials, Online published, 2026. 

Comparison of structural weight for tandem-type cryogenic liquid hydrogen fuel tanks with the same internal volume considering self-pressurization [DOI]

Dongkuk Choi, Sooyong Lee, Hak Gu Lee, Sang-Woo Kim, Moonsung Cho*, International Journal of Pressure Vessels and Piping, Vol.220, 105706, 2026. 

Geometric compensation of process-induced deformation in hybrid unidirectional/woven CFRP composites with multi-layup sequence using a physics-driven reverse deformation approach [DOI]

Dong-Hyeop Kim, Sang-Woo Kim*, Finite Elements in Analysis & Design, Vol.252, 104446, 2025. 

Energy-based nonlinear scaling methodology for predicting fatigue life of PBGA solder balls under cyclic thermal loading [DOI]

Jaehyo Lee, Young-Cheol Kim, Sang-Woo Kim*, Hyun-Ung Oh, International Journal of Aeronautical and Space Sciences, Vol.27, pp.1808-1823, 2026. 

Deterministic and stochastic natural frequency analysis of microwave-assisted compression-molded PLA/nano-HA composite beams and arches [DOI]

Mohammad Amir, Nishant Verma, Mohammad Talha, Sunny Zafar, Sang-Woo Kim*, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Online published, 2025. 

Fatigue assessment of the electro-mechanical actuator for individual blade control system under random vibration [DOI]

Young-Cheol Kim, Dong-Hyeop Kim, Sang-Woo Kim*, Seongpil Cho, International Journal of Aeronautical and Space Sciences, Vol.27, pp.497–511, 2026. 

Investigation of process-induced deformation in thermoplastic composites through sequential thermoforming simulation considering crystallization kinetics [DOI]

Solmi Kim, Dong-Hyeop Kim, Sang-Woo Kim*, Soo-Yong Lee, Finite Elements in Analysis & Design, Vol.249, 104389, 2025. 

Development and fabrication of the high-sensitivity M-HEAT sensor for real-time ablation depth estimation and measurement accuracy [DOI]

Myeong-Gi Kim, Sang-Woo Kim*, Yeon-Gwan Lee, International Journal of Aeronautical and Space Sciences, Vol.26, pp.2164–2179, 2025. 

Stochastic free vibration characteristics of cracked porous functionally graded plates in thermal environment [DOI]

Ahmed Raza, Sang-Woo Kim*, Mechanics Based Design of Structures and Machines, Vol.53, No.6, pp.4724-4745, 2025.

Damage detection in aircraft composite panels using damage detection algorithms based on Lamb waves [DOI]

Jibeom Jung, Dong-Hyeop Kim, Sang-Woo Kim*, Soo-Yong Lee, International Journal of Aeronautical and Space Sciences, Vol.26, pp.2265-2281, 2025. 

Estimation of impact location based on cross-correlation method for CFRP composite plate using multiplexed FBG sensors considering operating temperature of composite structure [DOI]

Myeong-Gi Kim, Sang-Woo Kim*, Advanced Composite Materials, Vol.34, No.6, pp.998-1017, 2025. 

Free flexural vibration of cracked carbon nanotube-reinforced composite plates resting on elastic foundations using XFEM [DOI]

Ahmed Raza, Mohammad Amir, Sang-Woo Kim*, Anh Tuan Nguyen, Advanced Composite Materials, Vol.34, No.6, pp.973-997, 2025. 

Fault detection in blade pitch systems of floating wind turbines utilizing transformer architecture [DOI]

Seongpil Cho, Sang-Woo Kim, Hyo-Jin Kim*, Structural Engineering and Mechanics, Vol.92, No.2, pp.121-131, 2024.

Low-velocity impact analysis in composite plates incorporating experimental interlaminar fracture toughness [DOI]

Gyeong-Han Lee, Ji-Yoon Yang, Sang-Woo Kim*, Soo-Yong Lee, Materials, Vol.17, pp.57-68, 2024. 

Mass-spring system modelling for biplane membrane flapping wings [DOI]

Anh Tuan Nguyen, Thanh Dong Pham, Vu Dan Thanh Le*, Quoc Tru Vu, Sang-Woo Kim, Jae-Hung Han, Acta Mechanica Sinica, Vol.41, 324093, 2025. 

A finite element framework for natural frequency of multilayered functionally graded stiffened panels with cutouts for aerospace applications [DOI]

Ahmed Raza, Jaehyeong Lim, Sang-Woo Kim*, International Journal of Aeronautical and Space Sciences, Vol.26, pp.1547-1563, 2025. 

Optimal prediction and validation of Johnson-Cook failure model for Al 6061 using genetic algorithm [DOI]

Gyeong-Han Lee, Jun-Woo Baek, Jaehyeong Lim, Sang-Woo Kim*, Soo-Yong Lee, Journal of Mechanical Science and Technology, Vol.38, No.11, 2024. 

An analytical modelling of free vibration in porous FG-CNTRC plate resting on elastic foundations [DOI]

Tayeb SI TAYEB, Mohammad Amir, Sang-Woo Kim*,Dongkuk Choi, Materials Today Communications, Vol.40, 109925, 2024. 

Comparative static analysis of functionally graded porous curved beams: deterministic versus stochastic approaches [DOI]

Mohammad Amir, Sang-Woo Kim*, Dongkuk Choi, The Journal of Strain Analysis for Engineering Design, Vol.59, No.8, pp.559-574, 2024. 

Enhanced prediction of reflected spectrum for FBG sensors with metallic coating embedded in CFRP composites: Unveiling the impact of process-induced residual stress and coating thickness [DOI]

Dong-Hyeop Kim, Sang-Woo Kim*, Composite Structures, Vol.344, 118321, 2024. 

A numerical study on thermal-structural characteristics of cryogenic common bulkhead propellant tanks for various tank length and core thickness [DOI]

Dongkuk Choi*, Soo-Yong Lee, Sang-Woo Kim, International Journal of Pressure Vessels and Piping, Vol.209, 105223, 2024. 

A thermodynamic model for cryogenic liquid hydrogen fuel tanks [DOI]

Dongkuk Choi*, Soo-Yong Lee, Sang-Woo Kim, Applied Sciences, Vol.14, No.9, p.3786, 2024. 

Free vibration analysis of the geometrically nolinear functionally graded porous curved panels in deterministic and stochastic domains considering various boundary conditions [DOI]

Mohammad Amir, Sang-Woo Kim*, Soo-Yong Lee, Waves in Random and Complex Media, Online published, 2024. 

Unleashing the potential of CFRP laminate: enhancing mechanical characteristics with STF-impregnated woven carbon fabric [DOI]

Jaehyeong Lim, Sang-Woo Kim*, Advanced Composite Materials, Vol.33, No.5, pp.1003-1025, 2024. 

On the natural frequency analysis of the shear deformable aircraft wing using an FE-based multilayered FGM model [DOI]

Mohammad Amir, Dong-Hyeop Kim, Sang-Woo Kim*, Soo-Yong Lee, Journal of Mechanical Science and Technology, Vol.38, No.5, pp.2361-2373, 2024. 

Enhancing impact energy absorption in composite sandwich structures through synergistic smart material integration [DOI]

Siti Zubaidah Mat Daud, Jaehyeong Lim, Mohammad Amir, Sang-Woo Kim*, Results in Engineering, Vol.21, 101902, 2024. 

Uncertainty quantification of thermo-elastic free vibration of cracked functionally graded plates using SXFEM approach [DOI]

Ahmed Raza, Sang-Woo Kim*, Advanced Composite Materials, Vol.33, No.5, pp.891-926, 2024. 

Evaluation of the multiaxial fatigue life of electro-mechanical actuator for aircraft blade pitch control [DOI]

Young-Cheol Kim, Dong-Hyeop Kim, Sang-Woo Kim*, Aerospace, Vol.11, No.1, p.91, 2024. 

Static analysis of FGM porous cooling plates with cutouts: a multilayered approach [DOI]

Jaehyeong Lim, Mohammad Amir, Sang-Woo Kim*, Soo-Yong Lee, Advanced Composite Materials, Vol.33, No.5, 815-838, 2024. 

Detection of internal damage in CFRP laminated plates using signal extraction method [DOI]

Seon-Woo Byun, Dong-Kuk Choi, Soo-Yong Lee, Cheol-Joo Lee, Sang-Woo Kim*, International Journal of Aeronautical and Space Sciences, Vol.25, pp.102-111, 2024. 

A study of the natural frequencies of the functionally graded curved beams including porosities: deterministic and stochastic modelling [DOI]

Mohammad Amir, Sang-Woo Kim*, Mechanics Based Design of Structures and Machines, Vol.52, No.8, pp.5970-5987, 2024. 

Experimental and numerical study on the perforation behavior of aluminum 6061-T6 cylindrical shell [DOI]

Seon-Woo Byun, Young-Jung Joo, Soo-Yong Lee, Sang-Woo Kim*, Materials, Vol.16, No.21, pp.7055, 2023. 

Finite element analysis of natural frequencies of the FGM porous cooling plate with cutouts: a multilayered FGM approach [DOI]

Mohammad Amir, Jaehyeong Lim, Sang-Woo Kim*, Soo-Yong Lee, Results in Engineering, Vol.20, 101532, 2023. 

Static analysis of shear-deformable aircraft wings using a multilayered functionally graded material model [DOI]

Dong-Hyeop Kim, Mohammad Amir, Sang-Woo Kim*, Advanced Composite Materials, Vol. 33, No. 4, pp. 479-503, 2023. 

Low-velocity impact responses of composite structures incorporating shear thickening fluid tubes under various temperatures [DOI]

Jaehyeong Lim, Sang-Woo Kim*, Composite Structures, Vol.322, 117349, 2023. 

Prediction of effective mechanical properties of 2D triaxially braided composites using a geometrical model incorporating flat portions of composite yarns [DOI]

Dong-Hyeop Kim, Sang-Woo Kim*, Materials Today Communications, Vol.35, 106255, 2023. 

Process-induced distortion of triaxially braided composites considering different geometric parameters using simplified constitutive model with effective property [DOI]

Dong-Hyeop Kim, Sang-Woo Kim*, Finite Elements in Analysis & Design, Vol.222, No.103974, 2023. 

Uncertain eigenvalue analysis for graded porous and sandwich arches by employing perturbation-based stochastic finite element analysis approach [DOI]

Mohammad Amir, Sang-Woo Kim*, Mohammad Talha, Journal of Vibration Engineering & Technologies, Vol.12, pp.2695-2714, 2023. 

Comparative study of different porosity models for the nonlinear free vibration analysis of the functionally graded cylindrical panels [DOI]

Mohammad Amir, Sang-Woo Kim*, Mohammad Talha, Mechanics Based Design of Structures and Machines, Vol.52, No.2, pp.773-799, 2022.

On the stochastic vibration analysis of the geometrically nonlinear graded cellular curved panels with material stochasticity [DOI]

Mohammad Amir, Sang-Woo Kim*, Mohammad Talha, International Journal of Pressure Vessels and Piping, Vol.199, 104768, 2022.

Estimation of effective mechanical properties of plain woven composites using direction-selective micromechanical models [DOI]

Dong-Hyeop Kim, Sang-Woo Kim*, International Journal of Aeronautical and Space Sciences, Vol.23, pp.521-532, 2022. 

Evaluation of curing process-induced deformation in plain woven composite structures based on cure kinetics considering various fabric parameters [DOI]

Dong-Hyeop Kim, Sang-Woo Kim*, In Lee, Composite Structures, Vol.287, 115379, 2022. 

Structural safety evaluation of test fixture for static load test of external fuel tank for fixed-wing aircraft [DOI]

Dong-Hyeop Kim, Young-Cheol Kim, Sang-Woo Kim*, Hyun-Gi Kim, Sungchan Kim, International Journal of Aeronautical and Space Sciences, Vol.23, pp.52-65, 2022. 

Impact localization for composite plate using the modified error-outlier algorithm with Pugh’s concept selection under various temperatures [DOI]

Myeong-Gi Kim, Sang-Woo Kim*, Composite Structures, Vol.272, No.15, pp.1-17, 2021.

Numerical evaluation of structural safety of linear actuator for flap control of aircraft based on airworthiness standard [DOI]

Dong-Hyeop Kim, Young-Cheol Kim, Sang-Woo Kim*, Aerospace, Vol.8, No.4, 104, 2021.

Enhanced damping characteristics of carbon fiber reinforced polymer based shear thickening fluid hybrid composite structures [DOI]

Jaehyeong Lim, Sang-Woo Kim*, Journal of Intelligent Material Systems and Structures, Vol.30, No.20, pp.2291-2303, 2020.

Self-sensing-based deflection control of carbon fibre-reinforced polymer (CFRP)-based shape memory alloy hybrid composite beams [DOI]

Sang-Hak Lee, Sang-Woo Kim*, Composite Structures, Vol.251, 112544, 2020. 

Numerical analysis of drop impact-induced damage of a composite fuel tank assembly on a helicopter considering liquid sloshing [DOI]

Dong-Hyeop Kim, Sungchan Kim, Sang-Woo Kim*, Composite Structures, Vol.229, pp.1-13, 2019. 

Improved position control of shape memory alloy actuator using the self-sensing model [DOI]

Sang-Hak Lee, Sang-Woo Kim*, Sensors and Actuators A: Physical, Vol.297, 111529, 2019.

Evaluation of bird strike-induced damages of helicopter composite fuel tank assembly based on fluid-structure interaction analysis [DOI]

Dong-Hyeop Kim, Sang-Woo Kim*, Composite Structures, Vol.210, pp.676-686, 2019.

Numerical investigation of impact-induced damage of auxiliary composite fuel tanks on Korean Utility Helicopter [DOI]

Dong-Hyeop Kim, Sang-Woo Kim*, Composites Part B: Engineering, Vol.165, pp.301-311, 2019.

Signal characteristics of surface-bonded Fiber Bragg Grating sensor with elastoplastic metallic coating subjected to residual strain [DOI]

Sang-Woo Kim*, Journal of Intelligent Material Systems and Structures, Vol.29, No.17, pp.3374-3385, 2018.

Impact localization on a composite plate based on error outliers with Pugh's concept selection [DOI]

Sang-Woo Kim*, Hosung Jang, Composite Structures, Vol.200, pp.449-465, 2018.

Characteristics of strain transfer and the reflected spectrum of a metal-coated fiber Bragg grating sensor [DOI]

Sang-Woo Kim*, Optics and Lasers in Engineering, Vol.96, pp.83-93, 2017.

Effect of sensing distance of aluminum-coated FBG sensors installed on a composite plate under a low-velocity impact [DOI]

Sang-Woo Kim*, Composite Structures, Vol.160, pp.248-255, 2017.

Evaluation of structural deformations of a mechanical connecting unit for oxidizer supplies by thermo-mechanical simulation [DOI]

Sang-Woo Kim*, Journal of Mechanical Science and Technology, Vol.30, No.10, pp.4669-4677, 2016.

Numerical investigation of optimal yaw misalignment and collective pitch angle for load imbalance reduction of rigid and flexible HAWT blades under sheared inflow [DOI]

Min-Soo Jeong, Myung-Chan Cha, Sang-Woo Kim, In Lee*, Energy, Vol.84, No.1, pp.518-532, 2015.

Damage evaluation and strain monitoring for composite cylinders using tin-coated FBG sensors under low-velocity impacts [DOI]

Sang-Woo Kim, Eun-Ho Kim, Min-Soo Jeong, In Lee*, Composites Part B: Engineering, Vol.74, pp.13-22, 2015.

Wake impacts on aerodynamic and aeroelastic behaviors of a horizontal axis wind turbine blade for sheared and turbulent flow conditions [DOI]

Min-Soo Jeong, Sang-Woo Kim, In Lee*, Seung-Jae Yoo, Journal of Fluids and Structures, Vol.50, pp.66-78, 2014.

Effects of torsional degree of freedom, geometric nonliearity, and gravity on aeroelastic behavior of large-scale horizontal-axis wind turbine blades under varying wind speed conditions [DOI]

Min-Soo Jeong, Myung-Chan Cha, Sang-Woo Kim, In Lee*, Taeseong Kim, Journal of Renewable and Sustainable Energy, Vol.6, No.1, pp.1-19, 2014.

Damage evaluation and strain monitoring of composite plates using metal-coated FBG sensors under quasi-static indentation [DOI]

Sang-Woo Kim, Myung-Chan Cha, In Lee*, Eun-Ho Kim, Il-Bum Kwon, Tae-Kyung Hwang, Composites Part B: Engineering, Vol.66, pp.36-45, 2014.

Static mechanical characteristics of tin-coated fiber Bragg grating sensors [DOI]

Sang-Woo Kim, Min-Soo Jeong, In Lee*, Il-Bum Kwon, Sensors and Actuators A: Physical, Vol.214, pp.156-162, 2014.

Investigation of wake effects on aeroelastic responses of a HAWT blade [DOI]

Min-Soo Jeong, Sang-Woo Kim, In Lee*, Seung-Jae Yoo, K.C. Park, AIAA Journal, Vol.52, No.6, pp.1133-1144, 2014. 

Deflection estimation of a wind turbine blade using FBG sensors embedded in the blade bonding line [DOI]

Sang-Woo Kim, Woo-Ram Kang, Min-Soo Jeong, In Lee*, Il-Bum Kwon, Smart Materials and Structures, Vol.22, No.12, pp.1-11, 2013

Effects of mechanical and geometric properties of adhesive layer on performance of metal-coated optical fiber sensors [DOI]

Sang-Woo Kim, Min-Soo Jeong, In Lee*, Il-Bum Kwon, Tae-Kyung Hwang, International Journal of Adhesion and Adhesives, Vol.47, pp.1-12, 2013.

The impact of yaw error on aeroelastic characteristics of a horizontal axis wind turbine blade [DOI]

Min-Soo Jeong, Sang-Woo Kim, In Lee*, Seung-Jae Yoo, K.C. Park, Renewable Energy, Vol.60, pp.256-268, 2013.

Determination of the maximum strains experienced by composite structures using metal coated optical fiber sensors [DOI]

Sang-Woo Kim, Min-Soo Jeong, In Lee*, Eun-Ho Kim, Il-Bum Kwon, Tae-Kyung Hwang, Composites Science and Technology, Vol.78, pp.48-55, 2013.

Effects of bonding layer characteristics on strain transmission and bond fatigue performance [DOI]

Sung-In Cho, Seung-Jae Yoo, Eun-Ho Kim, Sang-Woo Kim, In Lee*, Kwang-Chun Park, Il-Bum Kwon, Journal of Adhesion Science and Technology, Vol.26, No.10-11, pp.1325-1339, 2012.

Structural performance tests of down scaled composite wind turbine blade using embedded fiber Bragg grating sensors [DOI]

Sang-Woo Kim, Eun-Ho Kim, Mi-Sun Rim, Pratik Shrestha, In Lee*, International Journal of Aeronautical and Space Sciences, Vol.12, No.4, pp.346-353, 2011. 

Damage prediction of thick composite laminates subjected to low-velocity impact loads [DOI]

Dong-Kuk Choi, Seon-Woo Byun, Gyeong-Han Lee, Soo-Yong Lee*, Jin-Ho Roh, Cheol-Joo Lee, Advanced Composite Materials, Vol.316, No.6, pp.669-682, 2022. 

Fluid–structure interaction analysis of a fabric skin for fabric-covered wind turbine blades [DOI]

Dong-Kuk Choi, Hyung-Ju An, Soo-Yong Lee, Jae-Sung Bae*, International Journal of Aeronautical and Space Sciences, Vol.23, pp.92-101, 2021.

Optimal design of a spar cross-section for fabric-covered wind turbine blades [DOI]

Dong‑Guk Choi*, Soo-Yong Lee, Jin‑Ho Roh, Jae‑Sung Bae, International Journal of Aeronautical and Space Sciences, Vol.21, pp.647-656, 2020. 

Failure analysis of laminated composites subjected to flexural loadings [DOI]

Jin-Sung Kim, Soo-Yong Lee, Jin-Ho Roh*, Advanced Composite Materials, Vol.29, No.3, pp.301-316, 2020.

Structural design and analyses of a fabric covered wind turbine blade [DOI]

Dong-Guk Choi, Chan-Ho Kwak, Soo-Yong Lee, Jae-Sung Bae*, Hak-Gu Lee, Advanced Composite Materials, Vol.28, No.6, pp.607-623, 2019. 

Correlation between mechanical properties degradation and discoloration of epoxy polymer by solar radiation exposure [DOI]

Sangbong Lee, Donggeon Lee, Myungjun Kim, Taeyeop Kang, Soo-Yong Lee, Jung Sun Park*, International Journal of Aeronautical and Space Sciences, Vol.19, pp.843-854, 2018.

A mechanically fastened composite laminate joint and progressive failure analysis [DOI]

Jeong Sik Kwon, Jin Sung Kim, Soo-Yong Lee, Jae-Sung Bae*, Advanced Composite Materials, Vol.27, No.4, pp.439-456, 2018.

A study on a composite laminate pull-through joint [DOI]

Jeong-Sik Kwon, Jin-Sung Kim, Bum-Kyung Seo and Soo-Yong Lee, International Journal of Aeronautical and Space Sciences Vol.18, No.1, pp.63-69, 2017.

Design optimization of composite radar absorbing structures to improve stealth performance [DOI]

Byungwook Jang, Myungjun Kim, Jung Sun Park, Soo-Yong Lee, International Journal of Aeronautical and Space Sciences, Vol.17 No.3, pp.20-28, 2016.

Viscoelastic effect on unfolding behaviors of shape memory composite booms [DOI]

Jin-Ho Roh, Hark-Inn Kim, Soo-Yong Lee, Composite Structures, Vol.133, pp.235-245, 2015

Two-dimensional strain-based interactive failure theory for multidirectional composite laminates [DOI]

Soo-Yong Lee, Jin-Ho Roh, Composites: Part B, Vol 69 pp.69-75, 2015.

Probabilistic reliability design of satellite structures under launching environments by metamodel [DOI]

Jung Sun Park, Jong-Bin Im, Young-Hee Ro, Soo-Yong Lee, Key Engineering Materials, Vol.321-323, pp.1580-1584, 2006.

Local stability analysis in satellite design [DOI]

Jung Sun Park, Jong Bin Im, Soo-Yong Lee, Key Engineering Materials, Vol.297-300, pp.2356-2361, 2005.

Chemical shrinkage and residual stresses in laminated composites during cure [DOI]

Soo-Yong Lee, Jung Sun Park, Key Engineering Materials, Vol.297-300, pp.2870-2875, 2005,

A new exponential plate theory for laminated composites under cylindrical bending [DOI]

Jung Sun Park, Soo-Yong Lee, Transaction of the Japan Society for Aeronautical and Space Sciences, Vol.46, No.152, pp.89-95, 2003.

An exact exponential theory for the bending of simply supported laminated orthotropic plates [DOI]

Soo-Yong Lee, Jung Sun Park, JSME International Journal, Series A, Vol.46, No.2, pp.170-177, 2003.

Curing induced residual stresses in laminated cylindrical shells [DOI]

Soo-Yong Lee, KSME International Journal. Vol. 14, pp.19–29, 2000.

Viscoelastic and geometrically nonlinear behavior of laminated cylindrical shells [DOI]

Soo-Yong Lee, Jung Sun Park, KSME International Journal, Vol.13, pp.931–939, 1999.

Nonlinear finite element analysis of a laminated cylindrical shell with transverse matrix cracks [DOI]

Soo-Yong Lee, Jung Sun Park, KSME International Journal, Vol.13, pp.818–826, 1999.

Residual stresses in a laminated shell during cure [DOI]

Soo-Yong Lee, Jong-Koo Kang, KSME International Journal, Vol.13, pp.625–633, 1999.

Filament winding cylinders: III. selection of the process variables [DOI]

Soo-Yong Lee, George S. Springer, Journal of Composite Materials, Vol.24, No.12, pp.1344-1366, 1990.

Filament winding cylinders: II. validation of the process model [DOI]

Emilio P. Calius, Soo-Yong Lee, George S. Springer, Journal of Composite Materials, Vol.24, No.12, pp.1299-1343, 1990.

Filament winding cylinders: I. process model [DOI]

Soo-Yong Lee, George S. Springer, Journal of Composite Materials, Vol.24, No.12, pp.1270-1298, 1990.

Manufacturing stresses and strains in filament wound cylinders [DOI]

Emilio P Calius, Miriam Kidron, Soo-Yong Lee, George S. Springer, SAMPE Journal, Vol.24, pp.7-9, 1988.

Effects of cure on the mechanical properties of composites [DOI]

Soo-Yong Lee, George S. Springer, Journal of Composite Materials, Vol.22, No.1, 1988.